This is an exact replica of the helmet worn by Jean Alesi in the 1989 Formula 1 season.

The livery, Alesi’s traditional since the start of his career, is a homage to Elio de Angelis, with the design being the same the Italian driver wore. The helmet is white with red and black stripes from the sides to the back and Jean Alesi’s name written on each side.

The top is painted with a big royal blue raindrop and smaller raindrops can be seen inside the main one, painted in light blue.

In the 1997 season, Alesi finished fourth in the World Drivers’ Championship driving for Benetton.

The best Jean Alesi helmet designs to buy at the best cost

The wooden base is not included. It can be purchased from the accesories category.

Hans-Device not included.

Momentarily the three little plastic pieces shown on top of the helmet are not in stock. We will ship them separately once they are restocked.

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.

The helmets are manufactured using high standard procedures.

This is a highly sought after collectors items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post JEAN ALESI 1989 F1 REPLICA HELMET FULL SIZE appeared first on CM Helmets.

This is a replica of the helmet worn by Indycar driver Greg Moore in the 1997 season with the Forsythe team.

The helmet had Moore’s usual light-blue square pattern and royal blue tones adorned with golden lines.

The lower section is painted with a chequered flag painted with white and blue.

The best Greg Moore’s helmet designs to buy

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids, and solvents.

The helmets are manufactured using high-standard procedures.

This is a highly sought-after collectors’ items. All the little aerodynamic shapes, colors, and decals have been replicated to perfection on this helmet.

The stand, acrylic box and Hans device are not included in the purchase

The post GREG MOORE 1997 INDYCAR REPLICA HELMET appeared first on CM Helmets.

This is an exact replica of the helmet worn by Tom Kristensen during the 1993 season.

The best Tom Kristensen’s  helmets designs to buy

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.
The helmets are manufactured using high standard procedures
This is a highly sought after collectors items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post TOM KRISTENSEN 1993 REPLICA HELMET appeared first on CM Helmets.

This is an exact replica of the helmet worn by Formula 1 World Champion Heinz-Harald Frentzen during the 1997 season.

The best Heinz-Harald Frentzen’s  helmets designs to buy

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.
The helmets are manufactured using high standard procedures
This is a highly sought after collectors items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post HEINZ-HARALD FRENTZEN 1997 F1 REPLICA HELMET FULL SIZE appeared first on CM Helmets.

This is an exact replica of the helmet worn by Jan Magnussen during the 1997 Formula 1 season.

The colors of the device are black, red and white. The helmet is black and is adorned on the sides and the back with the Danish flag. Also, a white ring rounds the top of the helmet.

In 1997, Magnussen drove for Jackie Stewart’s team in his first full season and did not score points.

The best Jan Magnussen helmet designs to buy at the best cost

The wooden base is not included. It can be purchased from the accesories category.

Hans-Device not included.

Momentarily the three little plastic pieces shown on top of the helmet are not in stock. We will ship them separately once they are restocked.

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.

The helmets are manufactured using high standard procedures.

This is a highly sought after collectors items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post JAN MAGNUSSEN 1997 F1 REPLICA HELMET FULL SIZE appeared first on CM Helmets.

(FLAG VALUE: USD49,99)

THE FLAG MEASURES 3 X 5 FEET / 150 X 90 CM

The best collection of Michael Schumacher’s F1 helmets at the best cost

This is an exact replica of the helmet worn by Michael Schumacher in the 1997 Formula 1 season.

After a year of adaptation to Maranello, the German driver was ready to take the championship charge to Williams, the dominant team of the 1990s. For the 1997 season, he kept the traditional white helmet of his early years in Formula 1. The helmet maintains the usual blue circle on top, with white asteroids, while a big horizontal stripe painted with the German flag can be seen in the sides of the design.

In 1997, Schumacher fought with Canadian driver Jacques Villeneuve. Leading by one point entering the final Grand Prix at Jerez, Schumacher fell to Villeneuve after he collided with the Canadian and had to retire from the race. After his actions in the race, Schumacher was accused of trying to take out Villeneuve to win the championship, exactly what happened in 1994 with Damon Hill.

Schumacher was disqualified from the 1997 season and his points in that year were taken away. He kept his victories and other accolades of the year.

The best Michael Schumacher’s 1997 helmet designs to buy

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.

The helmets are manufactured using high standard procedures.

This is a highly sought after collectors’ items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post MICHAEL SCHUMACHER 1997 F1 REPLICA HELMET FULL SIZE appeared first on CM Helmets.

This is an exact replica of the helmet worn by Jean Alesi in the 1997 Formula 1 season.

The livery, Alesi’s traditional since the start of his career, is a homage to Elio de Angelis, with the design being the same the Italian driver wore. The helmet is white with red and black stripes from the sides to the back and Jean Alesi’s name written on each side.

The top is painted with a big royal blue raindrop and smaller raindrops can be seen inside the main one, painted in light blue.

In the 1997 season, Alesi finished fourth in the World Drivers’ Championship driving for Benetton.

The best Jean Alesi helmet designs to buy at the best cost

The wooden base is not included. It can be purchased from the accesories category.

Hans-Device not included.

Momentarily the three little plastic pieces shown on top of the helmet are not in stock. We will ship them separately once they are restocked.

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.

The helmets are manufactured using high standard procedures.

This is a highly sought after collectors items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post JEAN ALESI 1997 F1 REPLICA HELMET FULL SIZE appeared first on CM Helmets.

This is an exact replica worn by Formula One World Champion Jacques Villeneuve during his title-winning year in 1997.

Villeneuve’s regular helmet design is conformed by four main areas, in this livery, as a change from his classic design, the light blue one (top) was changed to indigo blue. The pink section (sides and front) with the shape of a “V” separated from the blue with a black outline, the green area and the lower section painted in red remain in the livery. The design of the “V” is similar to the one in the helmet worn by his father, the great Gilles Villeneuve.

In the 1997 season, Villeneuve’s second year in F1, he won the title after a fierce battle with Ferrari’s Michael Schumacher. The title was decided in the last race of the season at Jerez when Schumacher arrived at the European Grand Prix with a one-point gap over Villeneuve. 

While battling for the lead, Villeneuve tried an overtaking move over the German driver, who drove into him and prompted a crash. If both cars retired, Schumacher would take his third championship, but his move was not successful and Villeneuve carried on while his car beached in the gravel.

Villeneuve finished third in the race and won the championship. Afterwards, Schumacher was disqualified for his driving in the final race of the season.

The best Jacques Villeneuve’s helmet designs to buy

We use polyurethane paints which have excellent performance characteristics: adhesion, hardness, gloss, flexibility, and resistance to abrasion, impact, weathering, acids and solvents.
The helmets are manufactured using high standard procedures
This is a highly sought after collectors items. All the little aerodynamic shapes, colors and decals have been replicated to the perfection on this helmet.

The post JACQUES VILLENEUVE 1997 F1 WORLD CHAMPION F1 REPLICA HELMET FULL SIZE appeared first on CM Helmets.